SUGGESTED MODIFICATION SEQUENCE for TURBO Cars

10 July 2007 · Staff

SUGGESTED TURBO CAR MODIFICATION SEQUENCE

The following details will explain some of the general ways to modify your Turbo Vehicle for enhanced performance.

1, Ensure your vehicle is Roadworthy and complies with local Motor Vehicle Regulations in your country. Try to keep mods within your local laws guidelines.

2, Have your car serviced with all fluids, and hoses replaced also for best reliability.

From discussions with many Turbo owners over the last twenty years, we have found that some want to retain the factory reliability with a little more performance, while others want to make major modifications for the full power potential of their Turbo Vehicle.

In between these two extremes are many that are trying to increase power to a reasonable level, while not spending a lot of money and retaining reliability.

Forget fuel consumption, because to make power you have to burn the required amount of fuel. ( at least while under boost!!! )

There are many ways to save money while doing modifications and power ups, and that is what this information is all about.
I would be one of the most cost conscious rev heads around but most times you have to spend money wisely to make power reliably.

Obviously the more you can do yourself, the cheaper any modification becomes.
If you know exactly what needs to be done, paying someone else to do just that also saves money.

It’s when you are unsure of what is required to be done to achieve your goals that leaves you open to exploitation. This is usually by persons who may or may not know how and what to do to meet your expectations.

To this goal of doing what requires to be done to meet your needs, we will offer you the following information.

To MODIFY or NOT Considerations.
DETONATION
Pre-ignition & Fuel
Fuel Volume & Pressure
Air Supply
Exhaust & Heat
Lubrication
Cooling & Water
Breathing
Boost
Modification Sequence
Conclusions

INFORMATION HERE:- http://www.turboclub.com/turbotech/turbopremod1.htm

DUCT COLD AIR
AIR FILTERS
SPARK PLUGS
FUEL ENRICHMENT
INTER COOLING
INCREASE BOOST

INFORMATION HERE:- http://www.turboclub.com/turbotech/turbomod1.htm

READ BEFORE ANY MODIFICATIONS on this site.

Warning, TURBO CLUB makes this information available to you with NO express guarantee’s implied or otherwise on the suitability of the information being relevant to your Automobile Make or Model. You should not make any modifications to your Automobile unless a qualified Mechanic has approved and checked that the vehicle is safe and roadworthy and meets all relevant State Governed Regulations before proceeding onto public roads. The information contained in this ATCR Website is believed to be correct but the Author and Publisher make no warranties, express or implied that the information is free of errors, or that it will meet the particular requirements of individual Automotive application.

Add your Comment

Textile Help

Previous Article: Future alternative transport modes
Next Article: Apexi PowerFC Plug & Play ECU & Controller for Turbo Cars